PARKING BRAKE ASSEMBLY DISASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the LH side and RH side.

  • The procedures listed below are for the LH side.

PROCEDURE


  1. REMOVE REAR WHEEL LH

  2. DISCONNECT REAR DISC BRAKE CYLINDER ASSEMBLY LH


    1. A01WQGJ

      Remove the 2 bolts and disconnect the rear disc brake cylinder assembly LH.

      Note


      • Do not disconnect the flexible hose from the disc brake cylinder.

      • Do not twist or bend the flexible hose.

    2. Hang the rear disc brake cylinder assembly LH with a piece of wire.

  3. REMOVE REAR DISC


    1. A01WUZZE11
      Text in Illustration
      *a Matchmark

      Put matchmarks on the rear disc and axle hub if planning to reuse the rear disc.

    2. A01WWVK

      Turn the shoe adjuster until the disc turns freely, and then remove the rear disc.

  4. REMOVE PARKING BRAKE SHOE RETURN SPRING


    1. A01WV94E03

      Using SST, remove the parking brake shoe return spring.

      SST
      09703-30011

  5. REMOVE NO. 1 PARKING BRAKE SHOE ASSEMBLY LH


    1. A01WWFHE01

      Using SST, remove the shoe hold down spring cup, compression spring and shoe hold down spring pin.

      SST
      09718-00011
    2. A01WW39

      Disconnect the tension spring from the No. 1 parking brake shoe assembly LH.

    3. A01WTJO

      Remove the No. 1 parking brake shoe assembly LH and shoe adjuster screw set.

  6. REMOVE NO. 2 PARKING BRAKE SHOE ASSEMBLY LH


    1. A01WTF2E05

      Using SST, remove the shoe hold down spring cup, compression spring and shoe hold down spring pin.

      SST
      09718-00011

    2. Remove the No. 2 parking brake shoe assembly LH.

  7. REMOVE PARKING BRAKE SHOE LEVER LH


    1. A01WTEK

      Disconnect the No. 3 parking brake cable assembly from the parking brake shoe lever LH.

    2. Remove the parking brake shoe lever LH.

  8. REMOVE NO. 3 PARKING BRAKE CABLE ASSEMBLY


    1. A01WWAG

      Remove the bolt and No. 3 parking brake cable assembly.

  9. REMOVE PARKING BRAKE ANCHOR BLOCK


    1. A01WUCA

      Remove the 2 nuts and parking brake anchor block.