PARKING BRAKE CABLE INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL NO. 3 PARKING BRAKE CABLE ASSEMBLY

   
   

   1. Connect the parking brake actuator cable LH to the No. 3 parking brake cable assembly.

   2. 

      Text in Illustration

      *1	Cap
      *2	No. 3 Parking Brake Cable Assembly

      Insert cap into No. 3 parking brake cable assembly. Align the protrusion on cap with the slit of No. 3 parking brake cable assembly using the arrows in the illustration as guides.

   3. 

      Text in Illustration

      *1	Cap
      *2	No. 3 Parking Brake Cable Assembly

      Twist cap and No. 3 parking brake cable assembly until their flanges come together (approximately 90°) as shown in the illustration.

   4. Install the No. 2 parking brake support bracket to the No. 3 parking brake cable assembly with the nut.

      Torque:

      13 N*m  { 127 kgf*cm, 9 ft.*lbf }

   5. Install the No. 3 parking brake cable assembly with the 4 bolts.

      Torque:

      13 N*m  { 127 kgf*cm, 9 ft.*lbf }

2. CONNECT PARKING BRAKE CABLE

   Click here

3. INSTALL REAR DISC LH

   Click here

4. CONNECT REAR DISC BRAKE CYLINDER ASSEMBLY LH

   Click here

5. INSTALL REAR NO. 2 SUSPENSION CONTROL ACCUMULATOR BRACKET LH

   Click here

6. INSTALL REAR NO. 3 SUSPENSION CONTROL ACCUMULATOR LH

   Click here

7. INSTALL REAR SUSPENSION CONTROL ACCUMULATOR LH

   Click here

8. BLEED AIR FORM SUSPENSION FLUID

   Click here

9. CHECK FLUID LEVEL IN RESERVOIR

   Click here

10. INSPECT FOR SUSPENSION FLUID LEAK

    Click here

11. INSTALL HEIGHT CONTROL CYLINDER BRACKET ASSEMBLY LH

    Click here

12. INSTALL HEIGHT CONTROL UNIT PROTECTOR ASSEMBLY LH

    Click here

13. INSTALL SIDE STEP

    Click here

14. INSTALL MUDGUARD

    Click here

15. ADJUST PARKING BRAKE TRAVEL

    Click here

16. INSTALL REAR WHEEL

    Torque:

    131 N*m  { 1336 kgf*cm, 97 ft.*lbf }

17. BED IN PARKING BRAKE SHOES TO DISCS

    Click here