ELECTRIC PARKING BRAKE SYSTEM, Diagnostic DTC:C13AE/72

DTC Code DTC Name
C13AE/72 System information not Received

DESCRIPTION

DTC Code Detection Condition Trouble Area Note
C13AE/72

Both of following conditions are met:


  1. Engine switch is on (IG)

  2. After parking brake ECU assembly is replaced, when engine switch is first turned on (IG), system cannot communicate with ECM for approx. 4 sec.

  • Engine control System

  • CAN communication system

  • Parking brake ECU assembly

 An electric parking brake system malfunction is displayed on the multi-information display.

CAUTION / NOTICE / HINT

Note


  • If the parking brake ECU assembly is replaced, perform the "Reset Memory" and "Acquire Tension Sensor Zero Point" procedures Click here.

  • Before disconnecting connectors or fuses, turn the engine switch off and wait 20 seconds or more.

PROCEDURE


  1. CHECK DTC


    1. Turn the engine switch off.

    2. Connect the GTS to the DLC3.

    3. Turn the engine switch on (IG) and the GTS on.

    4. Check for DTC Click here.

      Result
      Result Proceed to
      DTC C13AE/72 and a CAN communication malfunction DTC are output at the same time (for LHD) A
      DTC C13AE/72 and a CAN communication malfunction DTC are output at the same time (for RHD) B
      DTC C13AE/72 is output and the MIL is illuminated C
      Only DTC C13AE/72 is output D
      No outputs E

      Tech Tips

      Refer to the Engine Control System (How to Proceed with Troubleshooting) procedures:



    A

    GO TO CAN COMMUNICATION SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING) Click here

    B

    GO TO CAN COMMUNICATION SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING) Click here

    C

    GO TO ENGINE CONTROL SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING)

    D

    REPLACE PARKING BRAKE ECU ASSEMBLY Click here

    E

    USE SIMULATION METHOD TO CHECK Click here