REAR BRAKE REASSEMBLY

PROCEDURE


  1. INSTALL PISTON SEAL


    1. A01WQFCE04
      *1 Lithium soap base glycol grease

      Apply a light coat of lithium soap base glycol grease to the entire inner and outer circumference of a new piston seal.

    2. Install the piston seal to the disc brake cylinder.

  2. INSTALL CYLINDER BOOT


    1. A01WWV7E02
      *1 Lithium soap base glycol grease

      Apply a light coat of lithium soap base glycol grease to the entire inner and outer circumference of a new cylinder boot.

    2. Apply a light coat of lithium soap base glycol grease to the entire outer circumference of the rear disc brake piston where it contacts the rear disc brake cylinder.

    3. Install the cylinder boot to the rear disc brake piston.

    4. Install the rear disc brake piston to the rear disc brake cylinder assembly.

      Note

      Do not install the rear disc piston forcibly in the rear disc brake cylinder assembly.

  3. INSTALL REAR DISC BRAKE PISTON


    1. A01WV2Z

      Install the cylinder boot to the disc brake cylinder.

      Note

      Install the boot securely to the grooves of the disc brake cylinder.

    2. Push in the piston by hand and install the cylinder boot into the grooves of the piston.

      Note

      Install the boot securely to the grooves of the piston.

  4. TEMPORARILY INSTALL REAR DISC BRAKE BLEEDER PLUG


    1. Temporarily install the bleeder plug to the disc brake cylinder.

      Tech Tips

      The bleeder plug will be tightened to a torque specification in the "Bleed Brake Line" procedure.

  5. INSTALL REAR DISC BRAKE BLEEDER PLUG CAP