VACUUM PUMP(for 1VD-FTV with Spare Tire) INSTALLATION

PROCEDURE


  1. INSTALL VACUUM PUMP ASSEMBLY


    1. A01WTB7

      Apply engine oil to 2 new O-rings.

    2. Install the 2 O-rings to the vacuum pump.

    3. A01WRTBE01

      Install the vacuum pump so that the coupling teeth of the vacuum pump (labeled A) and the groove of the camshaft (labeled B) are aligned.

      Note

      Be careful not to damage the O-ring.

    4. A01WPQA

      Install the vacuum pump with the 3 bolts.

      Torque:
      21 N*m  { 214 kgf*cm, 15 ft.*lbf }

      Note

      Confirm that the vacuum pump is not at an angle, and that there is no clearance between the fitting surfaces.

  2. CONNECT UNION TO CONNECTOR TUBE HOSE


    1. A01WQGQ

      Connect the hose to the vacuum pump.

  3. INSTALL NO. 2 IDLER PULLEY BRACKET (w/ Viscous Heater)

    Click here

  4. INSTALL NO. 2 IDLER PULLEY (w/ Viscous Heater)

    Click here

  5. INSTALL V-RIBBED BELT (w/ Viscous Heater)

    Click here

  6. INSTALL NO. 2 AIR CLEANER PIPE SUB-ASSEMBLY

    Click here

  7. INSTALL NO. 4 AIR TUBE

    Click here

  8. INSTALL NO. 2 AIR HOSE

    Click here

  9. INSTALL INTERCOOLER ASSEMBLY


    1. Install the intercooler assembly Click here.

  10. CHECK VACUUM PUMP OPERATION

    Click here