ELECTRIC PARKING BRAKE SWITCH INSPECTION

PROCEDURE

1. INSPECT ELECTRIC PARKING BRAKE SWITCH ASSEMBLY

   
   
   1. 

      Text in Illustration

      *a	Component without harness connected (Electric Parking Brake Switch)
      	ON (Lock)
      	OFF (Release)

      for LHD:

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection Switch Condition Specified Condition 8 (LOK1) - 14 (GND1) Pulled (Release) 97.09 to 107.31 kΩ Pushed (Lock) 2.09 to 2.31 kΩ Neutral 97.09 to 107.31 kΩ 9 (LOK2) - 14 (GND1) Pulled (Release) 5.51 to 6.09 kΩ Pushed (Lock) 1.045 to 1.155 kΩ Neutral 5.51 to 6.09 kΩ 1 (RLS1) - 14 (GND1) Pulled (Release) 1.045 to 1.155 kΩ Pushed (Lock) 5.51 to 6.09 kΩ Neutral 5.51 to 6.09 kΩ 2 (RLS2) - 14 (GND1) Pulled (Release) 1.045 to 1.155 kΩ Pushed (Lock) 5.51 to 6.09 kΩ Neutral 5.51 to 6.09 kΩ

      If the result is not as specified, replace the electric parking brake switch assembly.

   2. 

      Text in Illustration

      *a	Component without harness connected (Electric Parking Brake Switch)
      	ON (Lock)
      	OFF (Release)

      for RHD:

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection Switch Condition Specified Condition 14 (LOK1) - 8 (GND1) Pulled (Release) 97.09 to 107.31 kΩ Pushed (Lock) 2.09 to 2.31 kΩ Neutral 97.09 to 107.31 kΩ 13 (LOK2) - 8 (GND1) Pulled (Release) 5.51 to 6.09 kΩ Pushed (Lock) 1.045 to 1.155 kΩ Neutral 5.51 to 6.09 kΩ 7 (RLS1) - 8 (GND1) Pulled (Release) 1.045 to 1.155 kΩ Pushed (Lock) 5.51 to 6.09 kΩ Neutral 5.51 to 6.09 kΩ 6 (RLS2) - 8 (GND1) Pulled (Release) 1.045 to 1.155 kΩ Pushed (Lock) 5.51 to 6.09 kΩ Neutral 5.51 to 6.09 kΩ

      If the result is not as specified, replace the electric parking brake switch assembly.