CRAWL SWITCH INSPECTION

PROCEDURE


  1. INSPECT INTEGRATION CONTROL AND PANEL ASSEMBLY (CRAWL SWITCH)


    1. A01WQ61E02
      Text in Illustration
      *1 ON/OFF Switch
      *2 Turn Assist Function Switch
      *3 Speed Selector Switch
      *a

      Component without harness connected

      (Integration Control and Panel Assembly (CRAWL Switch))

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      3 (SW02) - 1 (E)

      Speed selector switch:

      Medium

      		 10 kΩ or higher

      Speed selector switch:

      Medium-high

      Speed selector switch:

      High

      Speed selector switch:

      Low

      		 Below 1 Ω

      Speed selector switch:

      Medium-low
      4 (ECU2) - 1 (E)

      Speed selector switch:

      Medium-low

      		 10 kΩ or higher

      Speed selector switch:

      Medium

      Speed selector switch:

      Medium-high

      Speed selector switch:

      Low

      		 Below 1 Ω

      Speed selector switch:

      High
      5 (SW04) - 1 (E)

      Speed selector switch:

      Low

      		 10 kΩ or higher

      Speed selector switch:

      Medium-low

      Speed selector switch:

      Medium

      Speed selector switch:

      Medium-high

      		 Below 1 Ω

      Speed selector switch:

      high
      16 (HSW) - 1 (E)

      ON/OFF switch:

      Pressed

      		 Below 1 Ω

      ON/OFF switch:

      Not pressed

      		 10 kΩ or higher
      15 (ECU) - 1 (E)

      Turn assist function switch:

      Pressed

      		 Below 1 Ω

      Turn assist function switch:

      Not pressed

      		 10 kΩ or higher

      If the result is not as specified, replace the integration control and panel assembly (CRAWL switch).