VEHICLE STABILITY CONTROL SYSTEM DTC CHECK / CLEAR

DTC CHECK/CLEAR

1. Check for DTCs.

   
   

   1. Turn the engine switch off.

   2. Connect the GTS to the DLC3.

   3. Turn the engine switch on (IG).

   4. Turn the GTS on.

   5. Enter the following menus: Chassis / ABS/VSC/TRC / Trouble Codes.

   6. Read the DTCs by following the prompts on the GTS screen.

2. Clear the DTCs.

   
   

   1. Turn the engine switch off.

   2. Connect the GTS to the DLC3.

   3. Turn the engine switch on (IG).

   4. Turn the GTS on.

   5. Enter the following menus: Chassis / ABS/VSC/TRC / Trouble Codes.

   6. Operate the GTS to clear the codes.

      Tech Tips

      Refer to the GTS operator's manual for further details.