TIRE PRESSURE WARNING RECEIVER REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY RH

    Click here

  4. REMOVE TIRE PRESSURE WARNING ECU AND RECEIVER


    1. B0018AJE02
      Text in Illustration
      *a Guide
      *b Clamp

      Remove the bolt.

    2. Detach the guide and clamp to remove the tire pressure warning ECU and receiver.

    3. Disconnect the connectors from the tire pressure warning ECU and receiver.