REAR LATERAL CONTROL ROD INSTALLATION

PROCEDURE

1. TEMPORARILY INSTALL REAR LATERAL CONTROL ROD ASSEMBLY

   
   
   1. 

      *1	Nut
      *2	Bolt

      Temporarily install the lateral control rod and washer with the 2 bolts and nut.

2. STABILIZE SUSPENSION

   Click here

3. TIGHTEN REAR LATERAL CONTROL ROD ASSEMBLY

   
   

   1. Tighten the bolt and nut.

      Torque:

      150 N*m  { 1530 kgf*cm, 111 ft.*lbf }

      Note

      Perform this procedure with all 4 wheels on the ground.