CAUTION / NOTICE / HINT
Tech Tips
Use the same procedures for the RH side and LH side.
The procedures listed below are for the LH side.
A bolt without a torque specification is shown in the standard bolt chart Click here.
PROCEDURE
INSTALL HOLLOW SPRING SUB-ASSEMBLY
Install the hollow spring to the frame.
INSTALL REAR COIL SPRING LH
Install the coil spring.
Tech Tips
Before installing the coil spring, check that the coil spring end is in the correct position. If not, reinstall it.
TEMPORARILY INSTALL REAR SHOCK ABSORBER ASSEMBLY LH
Temporarily install the lower side of the shock absorber with the bolt.
TEMPORARILY INSTALL REAR SHOCK ABSORBER ASSEMBLY RH
Temporarily install the lower side of the shock absorber with the bolt.
TEMPORARILY INSTALL REAR LATERAL CONTROL ROD ASSEMBLY
CONNECT REAR FLEXIBLE HOSE
STABILIZE SUSPENSION
TIGHTEN REAR SHOCK ABSORBER ASSEMBLY LH
Tighten the bolt.
Note
Perform this procedure with all 4 wheels on the ground.
TIGHTEN REAR SHOCK ABSORBER ASSEMBLY RH
Tighten the bolt.
Note
Perform this procedure with all 4 wheels on the ground.
TIGHTEN REAR LATERAL CONTROL ROD ASSEMBLY
INSTALL REAR STABILIZER END BRACKET LH
Connect the stabilizer end bracket with the 2 bolts.
INSTALL REAR STABILIZER END BRACKET RH
Connect the stabilizer end bracket with the 2 bolts.
CONNECT NO. 3 PARKING BRAKE CABLE ASSEMBLY
CONNECT NO. 2 PARKING BRAKE CABLE ASSEMBLY
CONNECT REAR AXLE BREATHER HOSE SUB-ASSEMBLY
BLEED BRAKE LINE