TIRE PRESSURE WARNING RESET SWITCH INSPECTION

PROCEDURE


  1. CHECK TIRE PRESSURE WARNING RESET SWITCH


    1. A01WWBPE17
      Text in Illustration
      *a

      Component without harness connected

      (Tire Pressure Warning Reset Switch)
      *b On
      *c Off

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 - 2 On Below 1 Ω
      Off 10 kΩ or higher

      If the result is not as specified, replace the tire pressure warning reset switch.