FRONT LOWER SUSPENSION ARM REASSEMBLY

PROCEDURE


  1. INSTALL FRONT NO. 1 SPRING BUMPER LH


    1. Install the 2 No. 1 spring bumpers.

      Torque:
      31 N*m  { 316 kgf*cm, 23 ft.*lbf }

  2. INSTALL FRONT NO. 2 LOWER ARM BUSH LH

    A01WRUPE05
    *1 Bush Positioning Protrusion

    1. Using SST and a press, press in a new bush.

      SST
      09710-26011   ( 09710-05081 )

      Note

      Press the bush while making sure the bush positioning protrusions are perpendicular to the lower arm, as shown in the illustration.

  3. INSTALL FRONT NO. 1 LOWER ARM BUSH LH

    A01WULWE02
    *1 MP grease

    1. Using SST and a press, press in a new bush.

      SST
      09223-00010
      09612-30012

    2. Apply MP grease to the locations shown in the illustration.

      Note

      Do not apply MP grease to the tapered or threaded parts of the ball joint.

  4. INSTALL FRONT LOWER BALL JOINT ATTACHMENT LH


    1. Install the attachment with a new nut and a new cotter pin.

      Torque:
      167 N*m  { 1703 kgf*cm, 123 ft.*lbf }

      Note

      If the holes for the cotter pin are not aligned, tighten the nut further up to 60°.