FRONT ACCELERATION SENSOR INSTALLATION

PROCEDURE


  1. INSTALL ACCELERATION SENSOR (for Driver Side)


    1. B001AH5

      Install the sensor with the bolt.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

    2. Connect the connector.

  2. INSTALL ACCELERATION SENSOR (for Front Passenger Side)


    1. B0019PJ

      Install the sensor with the bolt.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

    2. Connect the connector.

  3. INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL

    Click here

  4. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY

    Click here

  5. INSTALL STEERING CONTROL ECU WITH JUNCTION BLOCK (for LHD)

    Click here

  6. INSTALL STEERING CONTROL ECU WITH JUNCTION BLOCK (for RHD)

    Click here

  7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  8. CHECK SRS WARNING LIGHT


    1. Check the SRS warning light Click here.