HEIGHT CONTROL SENSOR(for Rear Side) REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE REAR WHEEL

  4. REMOVE REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH


    1. B0018FB

      Disconnect the connector and 2 clamps.

    2. B001A7Z

      Remove the 2 bolts, nut and sensor.

  5. REMOVE REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY RH


    1. B0018CL

      Disconnect the connector and 2 clamps.

    2. B0018MH

      Remove the 2 bolts, nut and sensor.