SUSPENSION CONTROL CYLINDER INSTALLATION

PROCEDURE


  1. INSTALL CENTER SUSPENSION CONTROL CYLINDER SUB-ASSEMBLY

    A01WX03

    1. Install the cylinder to the bracket with the 2 nuts.

      Torque:
      31 N*m  { 316 kgf*cm, 23 ft.*lbf }

  2. INSTALL HEIGHT CONTROL BRACKET WITH CYLINDER ASSEMBLY

    A01WUJ7

    1. Install the bracket with cylinder with the 2 bolts.

      Torque:
      31 N*m  { 316 kgf*cm, 23 ft.*lbf }

  3. CONNECT NO. 3 HEIGHT CONTROL TUBE LH

    A01WTGU

    1. Install a new gasket to the No. 3 height control tube, and then connect the height control tube to the control cylinder with the union bolt.

      Torque:
      50 N*m  { 510 kgf*cm, 37 ft.*lbf }

  4. CONNECT NO. 4 HEIGHT CONTROL TUBE

    A01WPF8

    1. Install a new gasket to the No. 4 height control tube, and then connect the height control tube to the control cylinder with the union bolt.

      Torque:
      50 N*m  { 510 kgf*cm, 37 ft.*lbf }

  5. CONNECT NO. 4 HEIGHT CONTROL TUBE LH

    A01WWXA

    1. Install a new gasket to the No. 4 height control tube, and then connect the height control tube to the control cylinder with the union bolt.

      Torque:
      50 N*m  { 510 kgf*cm, 37 ft.*lbf }

  6. CONNECT NO. 3 HEIGHT CONTROL TUBE

    A01WTTH

    1. Install a new gasket to the No. 3 height control tube, and then connect the height control tube to the control cylinder with the union bolt.

      Torque:
      50 N*m  { 510 kgf*cm, 37 ft.*lbf }

  7. INSTALL NO. 1 HEIGHT CONTROL VALVE ASSEMBLY

    Click here

  8. CONNECT REAR NO. 4 HEIGHT CONTROL TUBE

    Click here

  9. INSTALL NO. 5 HEIGHT CONTROL TUBE

    Click here

  10. INSTALL NO. 5 HEIGHT CONTROL TUBE LH

    Click here

  11. INSTALL NO. 6 HEIGHT CONTROL TUBE LH

    Click here

  12. INSTALL NO. 6 HEIGHT CONTROL TUBE

    Click here

  13. INSTALL CLAMP

    Click here

  14. INSTALL SUSPENSION CONTROL PUMP ACCUMULATOR ASSEMBLY

    Click here

  15. INSTALL NO. 7 HEIGHT CONTROL TUBE

    Click here

  16. BLEED AIR FROM SUSPENSION FLUID

    Click here

  17. CHECK FLUID LEVEL IN RESERVOIR

    Click here

  18. INSPECT FOR SUSPENSION FLUID LEAK

    Click here

  19. INSTALL HEIGHT CONTROL UNIT INSULATOR

    Click here

  20. INSTALL CENTER EXHAUST PIPE ASSEMBLY

    Click here

  21. INSTALL TAILPIPE ASSEMBLY

    Click here

  22. INSPECT FOR EXHAUST GAS LEAK


    • If gas is leaking, tighten the areas necessary to stop the leak. Replace damaged parts as necessary.