REAR DIFFERENTIAL CARRIER ASSEMBLY INSTALLATION

PROCEDURE


  1. INSTALL REAR DIFFERENTIAL CARRIER ASSEMBLY


    1. Install a new gasket.

    2. A01WT6E

      Install the differential carrier with the 10 washers and 10 nuts.

      Torque:
      72 N*m  { 734 kgf*cm, 53 ft.*lbf }

  2. CONNECT PROPELLER SHAFT ASSEMBLY


    1. A01WTFEE04
      *1 Matchmark
      *2 Bolt
      *3 Washer

      Align the matchmarks on the propeller shaft flange and differential flange.

    2. Connect the propeller shaft with the 4 bolts, 4 washers and 4 nuts.

      Torque:
      88 N*m  { 900 kgf*cm, 65 ft.*lbf }

  3. INSTALL REAR AXLE SHAFT


    1. Install the axle shaft Click here.

  4. ADD DIFFERENTIAL OIL

    Click here