DAMPING FORCE CONTROL ACTUATOR(for Rear Side) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedures for the RH side and LH side.

  • The procedures listed below are for the LH side.

PROCEDURE


  1. REMOVE HEIGHT CONTROL UNIT PROTECTOR ASSEMBLY LH

    Click here

  2. REMOVE FRONT FENDER MUDGUARD LH

    Click here

  3. REMOVE SIDE STEP ASSEMBLY

    Click here

  4. REMOVE HEIGHT CONTROL CYLINDER BRACKET ASSEMBLY

    Click here

  5. DISCHARGE SUSPENSION FLUID PRESSURE

    Click here

  6. REMOVE REAR SUSPENSION CONTROL ACCUMULATOR ASSEMBLY LH


    1. A01WS9V

      Remove the control accumulator from the control valve.

    2. Remove the O-ring from the accumulator.

  7. REMOVE REAR NO. 3 SUSPENSION CONTROL ACCUMULATOR LH


    1. A01WUX0

      Remove the No. 3 suspension control accumulator from the control valve.

    2. Remove the O-ring and back-up ring from the control accumulator.

  8. REMOVE REAR SHOCK ABSORBER CONTROL VALVE ASSEMBLY LH


    1. A01WRE5E01
      *1 Shock Absorber Control Valve
      *2 Bracket
      *3 Gasket
      *4 No. 4 Suspension Control Pressure Hose

      Disconnect the control valve connector.

    2. Remove the union bolt and gasket from the No. 4 suspension control pressure hose.

    3. Disconnect the wire harness clamp from the control valve bracket.

    4. A01WUYME01
      *1 No. 4 Height Control Tube
      *2 Union Nut Wrench

      Using a union nut wrench, disconnect the No. 4 height control tube from the control valve.

    5. A01WSOW

      Remove the 3 bolts and control valve with the bracket from the vehicle.

    6. A01WRZI

      Remove the 3 bolts and bracket from the control valve.

  9. REMOVE REAR NO. 2 SUSPENSION CONTROL ACCUMULATOR BRACKET LH


    1. Remove the bolt and bracket from the shock absorber control valve.