FRONT AXLE HUB REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedures for the LH side and RH side.

  • The procedures listed below are for the LH side.

PROCEDURE


  1. REMOVE FRONT WHEEL

  2. DISCONNECT FRONT DISC BRAKE CALIPER ASSEMBLY LH


    1. B0018JW

      Remove the bolt and nut, and disconnect the brake tube bracket from the steering knuckle.

    2. B001A80

      Remove the 2 bolts and disconnect the disc brake caliper from the steering knuckle.

      Note


      • Do not disconnect the flexible hose from the disc brake caliper.

      • Do not twist or bend the flexible hose.

  3. REMOVE FRONT DISC

    Click here

  4. REMOVE FRONT AXLE HUB GREASE CAP LH


    1. A01WPAD

      Using a screwdriver and hammer, remove the axle hub grease cap.

      Note

      Do not damage the axle hub.

  5. REMOVE FRONT AXLE SHAFT NUT LH


    1. B00184G

      Remove the cotter pin and adjusting lock cap.

    2. B00185X

      Using a 39 mm socket wrench, remove the axle hub nut.

  6. REMOVE FRONT AXLE HUB SUB-ASSEMBLY LH


    1. B001985

      Remove the 4 bolts.

    2. A01WRN3E01

      Using SST, remove the front axle hub together with the dust cover.

      SST
      09950-40011   ( 09951-04020, 09952-04010, 09953-04020, 09954-04010, 09955-04061, 09957-04010, 09958-04011 )
    3. Remove the O-ring.