FRONT AXLE HUB BOLT REPLACEMENT

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedures for the LH side and RH side.

  • The procedures listed below are for the LH side.

PROCEDURE


  1. REMOVE FRONT WHEEL

  2. DISCONNECT FRONT DISC BRAKE CALIPER ASSEMBLY LH

    Click here

  3. REMOVE FRONT DISC

    Click here

  4. REMOVE FRONT AXLE HUB BOLT LH


    1. A01WVOYE03
      *1 Hold
      *2 Turn

      Using SST and a screwdriver or equivalent to hold the axle hub, remove the front axle hub bolt.

      SST
      09650-17011

      Note

      Do not damage the threads of the hub bolt.

  5. INSTALL FRONT AXLE HUB BOLT LH


    1. A01WWS3E05
      *1 Washer
      *2 Nut
      *3 Hold
      *4 Turn

      Temporarily install a washer and hub nut to a new hub bolt as shown in the illustration.

      Note

      Install a hub nut to prevent damage to the hub bolt.

    2. Using a screwdriver or equivalent to hold the hub, turn the hub nut until the bottom surface of the hub bolt head touches the axle hub.

    3. Remove the washer and hub nut.

      Note

      Do not damage the threads of the hub bolt.

  6. INSPECT FRONT AXLE HUB BEARING LOOSENESS

    Click here

  7. INSPECT FRONT AXLE HUB RUNOUT

    Click here

  8. INSTALL FRONT DISC

    Click here

  9. CONNECT FRONT DISC BRAKE CALIPER ASSEMBLY LH

    Click here

  10. INSTALL FRONT WHEEL

    Torque:
    131 N*m  { 1336 kgf*cm, 97 ft.*lbf }