FRONT PROPELLER SHAFT ASSEMBLY INSTALLATION

PROCEDURE


  1. INSTALL FRONT PROPELLER SHAFT ASSEMBLY


    1. for Differential Side:


      1. B00199IE04
        Text in Illustration
        *a Matchmark

        Align the matchmarks on the yoke and differential flange.

      2. Connect the propeller shaft with the 4 washers and 4 nuts.

        Torque:
        88 N*m  { 900 kgf*cm, 65 ft.*lbf }

    2. for Transfer Side:


      1. B001AFR
        Text in Illustration
        *a Matchmark

        Align the matchmarks on the yoke and transfer flange.

      2. Install the propeller shaft with the 4 washers and 4 nuts.

        Torque:
        88 N*m  { 900 kgf*cm, 65 ft.*lbf }

  2. INSTALL PROPELLER SHAFT HEAT INSULATOR (w/ Heat Insulator)


    1. B00193X

      Install the insulator with the 2 bolts.

      Torque:
      16 N*m  { 163 kgf*cm, 12 ft.*lbf }

  3. INSTALL NO. 2 ENGINE UNDER COVER

    Click here

  4. INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

    Click here

  5. INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

    Click here

  6. INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

    Click here