TRANSFER ASSEMBLY INSTALLATION

PROCEDURE


  1. INSTALL TRANSFER ASSEMBLY (for AB60F)


    1. Install the transfer assembly with the 8 bolts.

      Torque:
      40 N*m  { 408 kgf*cm, 30 ft.*lbf }

      Note

      Take care not to damage the adaptor oil seal with the transfer input shaft spline.

  2. INSTALL AUTOMATIC TRANSMISSION WITH TRANSFER ASSEMBLY (for AB60F)

    Click here

  3. INSTALL TRANSFER ASSEMBLY (for AE80F)


    1. Install the transfer assembly with the 8 bolts.

      Torque:
      40 N*m  { 408 kgf*cm, 30 ft.*lbf }

      Note

      Take care not to damage the adaptor oil seal with the transfer input shaft spline.

    2. B0018KW

      Install the bracket with the bolt.

      Torque:
      29 N*m  { 296 kgf*cm, 21 ft.*lbf }

    3. Attach the 2 clamps.

    4. B0019B9

      w/ Temperature Sensor:

      Connect the 3 connectors and attach the 3 clamps.

    5. B0018N5

      w/o Temperature Sensor:

      Connect the 2 connectors and attach the 3 clamps.

    6. Connect the transfer breather hose sub-assembly and attach the 2 clamps.

  4. INSTALL REAR NO. 1 ENGINE MOUNTING INSULATOR (for AE80F)

    Click here

  5. INSTALL NO. 2 FRAME CROSSMEMBER SUB-ASSEMBLY (for AE80F)

    Click here

  6. INSTALL GROUND WIRE (for AE80F)


    1. B0018G6

      Install the ground wire with the 2 bolts.

      Torque:
      for Transfer Side
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }
      for Vehicle Side
      8.4 N*m  { 85 kgf*cm, 74 in.*lbf }

  7. CONNECT OIL COOLER TUBE (for AE80F)

    Click here

  8. INSTALL FRONT EXHAUST PIPE ASSEMBLY (for AE80F)

    Click here

  9. INSTALL PROPELLER SHAFT ASSEMBLY (for AE80F)

    Click here

  10. INSTALL FRONT PROPELLER SHAFT ASSEMBLY (for AE80F)

    Click here

  11. CONNECT FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY (for AE80F)

    Click here

  12. INSTALL OIL PAN PROTECTOR ASSEMBLY (for AE80F)

    Click here

  13. ADD TRANSFER OIL

    Click here

  14. CHECK FOR TRANSFER OIL LEAK

  15. INSTALL NO. 2 ENGINE UNDER COVER (for AE80F)

    Click here

  16. INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY (for AE80F)

    Click here

  17. INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH (for AE80F)

    Click here

  18. INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH (for AE80F)

    Click here