SHIFT LEVER ADJUSTMENT

PROCEDURE


  1. ADJUST SHIFT LEVER POSITION


    1. While pushing the shift lock release button, move the shift lever to N.

    2. A01WSM1

      Remove the nut and disconnect the floor shift gear shifting rod sub-assembly.

    3. B0019OPE04

      Turn the transmission control shaft lever RH of the park/neutral position switch assembly counterclockwise until it stops, and turn it clockwise 2 notches to set it to the N position.

    4. B001AP8E01

      Temporarily install the floor shift gear shifting rod sub-assembly with the nut.

    5. Tighten the nut while lightly pushing the lever rearward.

      Torque:
      13 N*m  { 130 kgf*cm, 9 ft.*lbf }
      Text in Illustration
      *a Lever
      B0018FC Nut
      B00199O Push

  2. INSPECT SHIFT LEVER POSITION

    Click here