TRANSFER ASSEMBLY REMOVAL

PROCEDURE


  1. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH (for AE80F)

    Click here

  2. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH (for AE80F)

    Click here

  3. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY (for AE80F)

    Click here

  4. REMOVE NO. 2 ENGINE UNDER COVER (for AE80F)

    Click here

  5. REMOVE OIL PAN PROTECTOR ASSEMBLY (for AE80F)

    Click here

  6. DRAIN TRANSFER OIL

    Click here

  7. DISCONNECT FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY (for AE80F)

    Click here

  8. REMOVE FRONT PROPELLER SHAFT ASSEMBLY (for AE80F)

    Click here

  9. REMOVE PROPELLER SHAFT ASSEMBLY (for AE80F)

    Click here

  10. REMOVE FRONT EXHAUST PIPE ASSEMBLY (for AE80F)

    Click here

  11. DISCONNECT OIL COOLER TUBE (for AE80F)

    Click here

  12. REMOVE GROUND WIRE (for AE80F)


    1. B0018G6

      Remove the 2 bolts and ground wire.

  13. SUPPORT AUTOMATIC TRANSMISSION ASSEMBLY (for AE80F)

    Click here

  14. REMOVE NO. 2 FRAME CROSSMEMBER SUB-ASSEMBLY (for AE80F)

    Click here

  15. REMOVE REAR NO. 1 ENGINE MOUNTING INSULATOR (for AE80F)

    Click here

  16. REMOVE TRANSFER ASSEMBLY (for AE80F)


    1. B0019SH

      Tilt the transmission downward.

      Note

      Make sure the cooling fan does not contact the fan shroud.

    2. B001AXB

      Detach the 2 clamps and disconnect the transfer breather hose sub-assembly.

    3. B0019B9

      w/ Temperature Sensor:

      Detach the 3 clamps and disconnect the 3 connectors.

    4. B0018N5

      w/o Temperature Sensor:

      Detach the 3 clamps and disconnect the 2 connectors.

    5. B0018KW

      Detach the 2 clamps.

    6. Remove the bolt and bracket.

    7. B001906

      Support the transfer assembly with a transmission jack.

      Note

      Secure the transfer assembly to the transmission jack using a belt, etc. to prevent it from falling.

    8. B001AFX

      Remove the 8 bolts.

      CAUTION:

      Be sure to perform this procedure with several people as the transfer assembly is very heavy.

    9. Pull the transfer assembly straight up and remove it from the transmission.

      Note

      Take care not to damage the adaptor oil seal with the transfer input shaft spline.

  17. REMOVE AUTOMATIC TRANSMISSION WITH TRANSFER ASSEMBLY (for AB60F)

    Click here

  18. REMOVE TRANSFER ASSEMBLY (for AB60F)


    1. B001B1N

      Remove the 8 transfer adaptor rear mounting bolts.

    2. Pull the transfer straight up and remove it from the transmission.

      Note

      Take care not to damage the adaptor oil seal with the transfer input shaft spline.