SPEED SENSOR(for Input Revolution Sensor) REMOVAL

PROCEDURE


  1. REMOVE AUTOMATIC TRANSMISSION ASSEMBLY

    Click here

  2. REMOVE AUTOMATIC TRANSMISSION HOUSING

    Click here

  3. FIX AUTOMATIC TRANSMISSION ASSEMBLY

    Click here

  4. REMOVE AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY

    Click here

  5. REMOVE OIL PUMP ASSEMBLY


    1. A01WTJPE01
      Text in Illustration
      *a Protective Tape

      Using a screwdriver, disconnect the connector from the transmission revolution sensor (NT).

      Tech Tips

      Use the screwdriver tip before use.

    2. B00186L

      Remove the 11 bolts from the transmission case.

    3. B001A7E

      Pull out the oil pump assembly.

      Note

      Do not damage the oil pump assembly.

    4. B001B2A

      Remove the oil pump O-ring from the oil pump assembly.

    5. A01WTDT

      Remove the 4 clutch drum oil seal rings from the oil pump assembly.

    6. A01WRZH

      Remove the 3 oil seal rings from the input shaft.

  6. REMOVE TRANSMISSION REVOLUTION SENSOR (NT)


    1. A01WS8N

      Using a T30 ''TORX'' socket wrench, remove the bolt and transmission revolution sensor (NT) and clamp from the oil pump assembly.

    2. A01WPKS

      Detach the clamp to remove the transmission revolution sensor (NT) from the clamp.