OIL COOLER

INSTALL OIL COOLER ASSEMBLY

Text in Illustration
*1	Air Cooled Oil Cooler Tube
*2	Oil Cooler Inlet Hose
*3	Oil Cooler Outlet Hose
*a	Lower Side
*b	Vehicle Rear Side
*c	0 to 3 mm (0 to 0.118 in.)
*d	2 to 7 mm (0.079 to 0.275 in.)
*e	Matchmarks

Install the oil cooler inlet hose to the oil cooler assembly, and slide the clip to secure the hose as shown in the illustration.

Install the oil cooler outlet hose to the oil cooler assembly, and slide the clip to secure the hose as shown in the illustration.
Install the air cooled oil cooler tube to the oil cooler outlet hose and oil cooler inlet hose, and slide the 2 clips to secure the hoses as shown in the illustration.
Install the rear transmission oil cooler air duct with the 4 bolts.

Torque:

4.9 N*m { 50 kgf*cm, 43 in.*lbf }
Connect the air cooled oil cooler tube to the transmission oil cooler air duct with the bolt.

Torque:

4.9 N*m { 50 kgf*cm, 43 in.*lbf }
Text in Illustration

*a Claw

Temporarily put the oil cooler assembly on the radiator support.

Note

Securely attach the 2 claws of the oil cooler into the holes of the radiator support.
Install the 4 bolts in the sequence shown in the illustration.

Torque:

12 N*m { 122 kgf*cm, 9 ft.*lbf }

Text in Illustration
*a	Claw

INSTALL TRANSMISSION OIL COOLER AIR DUCT

Install the transmission oil cooler air duct with the 4 bolts.

Torque:

4.9 N*m { 50 kgf*cm, 43 in.*lbf }

INSTALL OIL COOLER TUBE

Temporarily install the oil cooler tube to the fan shroud with bolt A. Install bolt B and tighten it to the specified torque. Then tighten bolt A to the specified torque.

Torque:

5.0 N*m { 51 kgf*cm, 44 in.*lbf }

INSTALL INLET NO. 4 OIL COOLER HOSE

Text in Illustration
*a	0 to 3.0 mm (0 to 0.118 in.)
*b	2.0 to 7.0 mm (0.0785 to 0.275 in.)
*c	Paint Mark

Install the inlet No. 4 oil cooler hose, and slide the 2 clips to secure the hose as shown in the illustration.

Note

Make sure the pinching portion of each clip is facing the direction shown in the illustration and the paint marks are aligned as shown in the illustration.

INSTALL INLET NO. 2 OIL COOLER HOSE

Text in Illustration
*1	Inlet No. 2 Oil Cooler Hose
*2	Inlet No. 3 Oil Cooler Hose
*a	0 to 3.0 mm (0 to 0.118 in.)
*b	2.0 to 7.0 mm (0.0785 to 0.275 in.)

Install the inlet No. 2 oil cooler hose, and slide the 2 clips to secure the hose as shown in the illustration.

Note

Make sure the pinching portion of each clip is facing the direction shown in the illustration.

INSTALL INLET NO. 3 OIL COOLER HOSE

Install the inlet No. 3 oil cooler hose, and slide the 2 clips to secure the hose as shown in the illustration.

Note

Make sure the pinching portion of each clip is facing the direction shown in the illustration.

INSTALL OUTLET NO. 1 OIL COOLER HOSE

Text in Illustration
*1	Outlet No. 1 Oil Cooler Hose
*2	Inlet No. 1 Oil Cooler Hose
*a	0 to 3.0 mm (0 to 0.118 in.)
*b	2.0 to 7.0 mm (0.0785 to 0.275 in.)
*c	Paint Mark

Install the outlet No. 1 oil cooler hose, and slide the 2 clips to secure the hose as shown in the illustration.

Note

Make sure the pinching portion of each clip is facing the direction shown in the illustration and the paint marks are aligned as shown in the illustration.

Attach the hose to the flexible hose clamp and close the clamp as shown in the illustration.

INSTALL INLET NO. 1 OIL COOLER HOSE

Install the inlet No. 1 oil cooler hose, and slide the 2 clips to secure the hose as shown in the illustration.

Note

Make sure the pinching portion of each clip is facing the direction shown in the illustration and the paint marks are aligned as shown in the illustration.

INSTALL TRANSMISSION OIL COOLER HOSE