PARK / NEUTRAL POSITION SWITCH ADJUSTMENT

PROCEDURE


  1. ADJUST PARK/NEUTRAL POSITION SWITCH ASSEMBLY


    1. Loosen the bolt of the park/neutral position switch assembly and move the shift lever to N.

    2. A01WTSJE03
      Text in Illustration
      *a Neutral Basic Line
      *b Groove

      Align the groove with the neutral basic line.

    3. Hold the park/neutral position switch assembly in the position described above and tighten the bolt.

      Torque:
      13 N*m  { 130 kgf*cm, 9 ft.*lbf }

    4. After the adjustment, perform the on-vehicle inspection Click here.