CRUISE CONTROL MAIN SWITCH INSTALLATION

PROCEDURE

1. INSTALL CRUISE CONTROL MAIN SWITCH

   
   

   1. Connect the connector to install the cruise control main switch wire.

   2. Install the cruise control main switch with the 2 screws.

      Torque:

      2.4 N*m  { 24 kgf*cm, 22 in.*lbf }

2. INSTALL STEERING PAD

   Click here

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

4. CHECK SRS WARNING LIGHT

   Click here

5. INSTALL UPPER RADIATOR SUPPORT SEAL

   Click here