ROAD SIGN ASSIST SYSTEM CUSTOMIZE PARAMETERS

PROCEDURE

1. CUSTOMIZE ROAD SIGN ASSIST SYSTEM

   Tech Tips

   The following items can be customized.

   Note

   
   

   • When the customer requests a change in a function, first make sure that the function can be customized.

   • Be sure to make a note of the current settings before customizing.

   • When troubleshooting a function, first make sure that the function is set to the default setting.

   
   

   1. Customizing with the Multi-information display

      
      

      1. Turn the engine switch on (IG).

      2. Enter the following menus: Settings Tab.

      3. Select the setting by referring to the table below.

         Settings Tab

         Display	Default	Content	Setting	Relevant ECU
         RSA ON/OFF	ON	System ON/OFF setting	ON or OFF	forward recognition camera

      4. Enter the following menus: Settings Tab / Settings / Road Sign Assist Setup

      5. Select the setting by referring to the table below.

         Road Sign Assist Setup

         Display	Default	Content	Setting	Relevant ECU
         Excess Speed	Only Visual	Speed limit exceeded notification method setting	No Notification, Only Visual or Visual and Audible	forward recognition camera
         Notification Level	2 km/h (1 mph)	Speed limit exceeded notification level setting*	10 km/h (5 mph), 5 km/h (3 mph), 2 km/h (1 mph)	forward recognition camera
         Other Notifications	Only Visual	No overtaking notification method setting	No Notification, Only Visual or Visual and Audible	forward recognition camera

         *: When the speed unit settings of the meter are changed, the displayed unit also changes.