DYNAMIC RADAR CRUISE CONTROL SYSTEM OPERATION CHECK


  1. INPUT SIGNAL CHECK


    1. A01WTKH

      Connect the GTS to the DLC3.

    2. Check the cruise control main switch using the Data List function of the GTS (ON/OFF, -/SET, +/RES and CANCEL).

  2. INSPECT MODE SWITCH


    1. A01WPM9

      Turn the engine switch on (IG).

    2. Push and hold the switch of the cruise control main switch (ON/OFF) for 1.5 seconds or more with the dynamic radar cruise control system off to change to the constant speed control mode.

    3. A01WVDHE01
      Text in Illustration
      *1

      Cruise Control Indicator

      (Vehicle-to-vehicle Distance Control Mode)
      *2

      Cruise Control Indicator

      (Constant Speed Control Mode)

      Check that the cruise control indicator (vehicle-to-vehicle distance control mode) goes off and the cruise control indicator (constant speed control mode) illuminates.

      Tech Tips

      If a malfunction is detected, turn the engine switch off and repeat the procedure above.

  3. INSPECT STEERING PAD SWITCH ASSEMBLY


    1. Turn the engine switch on (IG).

    2. Turn the dynamic radar cruise control system on using the cruise control main switch (ON/OFF).

    3. A01WPIME02
      Text in Illustration
      *1 Vehicle-to-vehicle Distance Control Switch

      Press the vehicle-to-vehicle distance control switch of the steering pad switch assembly.

    4. Check that the indication of the vehicle-to-vehicle distance, which is shown on the multi-information display (combination meter assembly), changes from long to middle to short in that order.

      Tech Tips

      Long is automatically selected each time the engine switch is turned on (IG).