STARTER REMOVAL

PROCEDURE


  1. REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY RH


    1. Click here.

  2. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. REMOVE STARTER COVER


    1. B0019M3

      Remove the 3 bolts and starter cover.

  5. REMOVE STARTER ASSEMBLY


    1. B0018DO

      Disconnect the starter connector.

    2. Remove the nut and disconnect the starter wire.

    3. B001AU9

      Remove the 2 bolts and starter.

    4. B001A1P

      Remove the flywheel housing side cover.