OIL LEVEL SENSOR REMOVAL

PROCEDURE


  1. REMOVE FRONT WHEEL RH

  2. REMOVE FRONT FENDER APRON TRIM PACKING A

    Click here

  3. REMOVE FRONT FENDER APRON TRIM PACKING C

    Click here

  4. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

    Click here

  5. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

    Click here

  6. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

    Click here

  7. DRAIN ENGINE OIL

    Click here

  8. REMOVE NO. 2 ENGINE UNDER COVER

    Click here

  9. DISCONNECT OIL COOLER TUBE


    1. B0019BU

      Remove the 3 bolts and disconnect the oil cooler tube from the engine.

  10. REMOVE ENGINE OIL LEVEL SENSOR


    1. B0019CZ

      Disconnect the sensor connector.

    2. Remove the 4 bolts and engine oil level sensor.

    3. Remove the gasket from the engine oil level sensor.