ENGINE OIL COOLER INSTALLATION

PROCEDURE


  1. INSTALL OIL COOLER SPACER


    1. B001B0GE01
      *1 Gasket

      Apply a light coat of engine oil to a new gasket.

    2. Install the gasket to the oil cooler spacer.

    3. B0019DK

      Install the oil cooler spacer to the oil filter bracket with the bolt.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

  2. INSTALL OIL COOLER ASSEMBLY


    1. B001AOI

      Apply a light coat of engine oil to 2 new O-rings.

    2. Install the 2 O-rings to the oil cooler.

    3. B00192H

      Install the oil cooler with the 5 nuts.

      Torque:
      21 N*m  { 214 kgf*cm, 15 ft.*lbf }

  3. INSTALL OIL FILTER BRACKET


    1. B00192X

      Apply a light coat of engine oil to 2 new O-rings.

    2. Install the 2 O-rings to the timing chain cover.

    3. B0019UX

      Install the oil filter bracket with the 2 nuts and 2 bolts.

      Torque:
      35 N*m  { 357 kgf*cm, 26 ft.*lbf }

  4. INSTALL NO. 1 OIL COOLER BRACKET


    1. B001961

      Connect the ground wire to the cylinder block.

    2. Install the oil cooler bracket with the 2 nuts.

      Torque:
      21 N*m  { 214 kgf*cm, 15 ft.*lbf }

  5. INSTALL NO. 2 WATER BY-PASS PIPE SUB-ASSEMBLY


    1. B0019GU

      Connect the 4 hoses.

    2. Install the water by-pass hose with the 3 bolts.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

  6. CONNECT COOLER COMPRESSOR ASSEMBLY

    Click here

  7. INSTALL OIL PRESSURE SENDER GAUGE ASSEMBLY

    Click here

  8. INSTALL OIL FILTER ELEMENT

    Click here

  9. INSTALL FAN AND GENERATOR V BELT

    Click here

  10. INSTALL V-BANK COVER SUB-ASSEMBLY

    Click here

  11. ADD ENGINE OIL

    Click here

  12. ADD ENGINE COOLANT

    Click here

  13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  14. INSPECT FOR OIL LEAK

    Click here

  15. INSPECT ENGINE OIL LEVEL

    Click here

  16. INSPECT FOR COOLANT LEAK

    Click here

  17. INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

    Click here

  18. INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

    Click here

  19. INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

    Click here

  20. INSTALL UPPER RADIATOR SUPPORT SEAL

    Click here