EXHAUST GAS TEMPERATURE SENSOR(for DPF) INSTALLATION

PROCEDURE


  1. INSTALL NO. 3 EXHAUST GAS TEMPERATURE SENSOR (for Bank 2)

    Note

    If the sensor is dropped, replace it with a new one.


    1. B0018TOE01
      Text in Illustration
      *a Torque Wrench Fulcrum Length

      Using a 14 mm union nut wrench, install the No. 3 exhaust gas temperature sensor.

      Torque:
      Specified tightening torque
      30 N*m  { 306 kgf*cm, 22 ft.*lbf }

      Tech Tips


      • Calculate the torque wrench reading when changing the fulcrum length of the torque wrench Click here.

      • When using a union nut wrench (fulcrum length of 25 mm (0.984 in.)) + torque wrench (fulcrum length of 180 mm (7.087 in.)): 26 N*m (268 kgf*cm, 19 ft.*lbf)

      • The identification tape on the exhaust gas temperature sensor is gray.

  2. INSTALL NO. 2 EXHAUST GAS TEMPERATURE SENSOR (for Bank 1)

    Note

    If the sensor is dropped, replace it with a new one.


    1. B0018TOE01
      Text in Illustration
      *a Torque Wrench Fulcrum Length

      Using a 14 mm union nut wrench, install the No. 2 exhaust gas temperature sensor.

      Torque:
      Specified tightening torque
      30 N*m  { 306 kgf*cm, 22 ft.*lbf }

      Tech Tips


      • Calculate the torque wrench reading when changing the fulcrum length of the torque wrench Click here.

      • When using a union nut wrench (fulcrum length of 25 mm (0.984 in.)) + torque wrench (fulcrum length of 180 mm (7.087 in.)): 26 N*m (268 kgf*cm, 19 ft.*lbf)

      • The identification tape on the exhaust gas temperature sensor is white.

  3. INSTALL EXHAUST GAS TEMPERATURE SENSOR

    Note

    If the sensor is dropped, replace it with a new one.


    1. B0018TOE01
      Text in Illustration
      *a Torque Wrench Fulcrum Length

      Using a 14 mm union nut wrench, install the 2 exhaust gas temperature sensors.

      Torque:
      Specified tightening torque
      30 N*m  { 306 kgf*cm, 22 ft.*lbf }

      Tech Tips


      • Calculate the torque wrench reading when changing the fulcrum length of the torque wrench Click here.

      • When using a union nut wrench (fulcrum length of 25 mm (0.984 in.)) + torque wrench (fulcrum length of 180 mm (7.087 in.)): 26 N*m (268 kgf*cm, 19 ft.*lbf)

      • The identification tape on the exhaust gas temperature sensor is pink.

  4. INSTALL MONOLITHIC CONVERTER ASSEMBLY

    Click here

  5. INSTALL NO. 4 EXHAUST GAS TEMPERATURE SENSOR

    Note

    If the sensor is dropped, replace it with a new one.


    1. B0018TOE01
      Text in Illustration
      *a Torque Wrench Fulcrum Length

      Using a 14 mm union nut wrench, install the 2 No. 4 exhaust gas temperature sensors.

      Torque:
      Specified tightening torque
      30 N*m  { 306 kgf*cm, 22 ft.*lbf }

      Tech Tips


      • Calculate the torque wrench reading when changing the fulcrum length of the torque wrench Click here.

      • When using a union nut wrench (fulcrum length of 25 mm (0.984 in.)) + torque wrench (fulcrum length of 180 mm (7.087 in.)): 26 N*m (268 kgf*cm, 19 ft.*lbf)

      • The identification tape on the exhaust gas temperature sensor is gold.

  6. INSTALL FRONT NO. 2 EXHAUST PIPE ASSEMBLY

    Click here