EGR COOLER INSTALLATION

PROCEDURE

1. INSTALL STUD BOLT

   
   

   1. Using an E6 "TORX" socket wrench, install the 4 stud bolts to the EGR cooler assembly.

      Torque:

      6.0 N*m  { 61 kgf*cm, 53 in.*lbf }

2. INSTALL NO. 8 WATER BY-PASS HOSE

   
   

   1. Install the 2 No. 8 water by-pass hoses.

3. INSTALL NO. 3 WATER BY-PASS PIPE

   
   

   1. Connect the 2 hoses and install the No. 3 water by-pass pipe with the bolt.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

4. INSTALL NO. 1 AND NO. 2 EGR VALVE ASSEMBLIES

   Click here