AIR PUMP(w/ Secondary Air Injection System) REMOVAL

PROCEDURE


  1. REMOVE UPPER RADIATOR SUPPORT SEAL

    Click here

  2. REMOVE V-BANK COVER SUB-ASSEMBLY

    Click here

  3. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH


    1. B00189X

      Remove the 3 bolts and 2 screws.

    2. Turn the clip indicated by the arrow in the illustration to remove the fender splash shield.

  4. REMOVE FRONT FENDER LINER RH


    1. Remove the screw, and disconnect the liner from the front bumper cover.

    2. Using a T30 "TORX" socket, remove the 3 screws.

    3. Remove the 5 clips.

    4. Partially remove the fender liner.

      Tech Tips

      It is not necessary to fully remove the fender liner. Partially remove it so that the air pump can be removed.

  5. REMOVE FRONT FENDER APRON SEAL FRONT RH

    Click here

  6. REMOVE AIR CLEANER HOSE ASSEMBLY

    Click here

  7. REMOVE AIR CLEANER ASSEMBLY

    Click here

  8. REMOVE NO. 2 AIR INJECTION SYSTEM HOSE


    1. B001AR5E02
      *1 Engine Room Side:
      *2 Front Fender RH Side:

      Engine Room Side:


      1. Disconnect the 3 clamps.

      2. Disconnect the No. 2 hose.

      3. Using a clip remover, remove the clamp from the body panel.

    2. Front Fender RH Inside:


      1. Disconnect the No. 2 hose from the air pump.

  9. REMOVE NO. 3 AIR INJECTION SYSTEM HOSE


    1. B001AO0E02
      *1 Engine Room Side:
      *2 Front Fender RH Side:

      Engine Room Side:


      1. Disconnect the clamp and No. 3 hose.

      2. Using a clip remover, remove the clamp from the body panel.

    2. Front Fender RH Inside:


      1. Disconnect the clamp and No. 3 hose from the air pump.

      2. Using a clip remover, remove the clamp from the bracket.

  10. REMOVE AIR PUMP ASSEMBLY WITH BRACKET


    1. B001A7V

      Disconnect the 2 air pump connectors and detach the 3 wire harness claws.

    2. B0018YU

      Remove the 2 bolts, 2 nuts and air pump assembly with bracket.

  11. REMOVE AIR PUMP INLET


    1. B0018GGE02
      *1 No. 1 Air Injection System Hose
      *2 Air Pump Inlet

      Remove the 2 bolts and air pump inlet.

  12. DISCONNECT NO. 1 AIR INJECTION SYSTEM HOSE


    1. Disconnect the 2 hoses.

  13. REMOVE AIR PUMP ASSEMBLY


    1. B00182F

      Using a clip remover, detach the 2 clamps and remove the 2 air pump assemblies from the bracket.

    2. Disconnect the 6 air pump insulators.