FUEL TEMPERATURE SENSOR INSTALLATION

PROCEDURE


  1. INSTALL FUEL TEMPERATURE SENSOR

    Note

    If the fuel temperature sensor is dropped, replace it with a new one.


    1. Apply a light coat of engine oil to a new O-ring.

    2. Install the O-ring to the sensor.

    3. Using SST, install the fuel temperature sensor.

      SST
      09817-33191
      Torque:
      22 N*m  { 224 kgf*cm, 16 ft.*lbf }
    4. B001A9Z

      Connect the fuel temperature sensor connector.

  2. INSTALL NO. 1 AIR CLEANER PIPE SUB-ASSEMBLY

    Click here

  3. INSTALL HEATER WATER PIPE SUB-ASSEMBLY (w/ Viscous Heater)

    Click here

  4. INSTALL INTAKE AIR CONNECTOR

    Click here

  5. TEMPORARILY INSTALL NO. 1 AIR CLEANER HOSE

    Click here

  6. INSTALL AIR CLEANER CAP SUB-ASSEMBLY

    Click here

  7. CONNECT WATER HOSE SUB-ASSEMBLY (w/ Viscous Heater)

    Click here

  8. INSTALL INTERCOOLER ASSEMBLY

    Click here

  9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.


    1. Connect the cables to the negative (-) main battery and sub-battery terminals.

  10. ADD ENGINE COOLANT

    Click here

  11. INSPECT FOR COOLANT LEAK

    Click here

  12. INSTALL UPPER RADIATOR SUPPORT SEAL

    Click here

  13. INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

    Click here

  14. INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

    Click here

  15. INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

    Click here