FUEL TEMPERATURE SENSOR REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.


    1. Disconnect the cables from the negative (-) main battery and sub-battery terminals.

  3. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

    Click here

  4. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

    Click here

  5. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

    Click here

  6. REMOVE UPPER RADIATOR SUPPORT SEAL

    Click here

  7. DRAIN ENGINE COOLANT

    Click here

  8. REMOVE INTERCOOLER ASSEMBLY

    Click here

  9. DISCONNECT WATER HOSE SUB-ASSEMBLY

    Click here

  10. REMOVE AIR CLEANER CAP SUB-ASSEMBLY

    Click here

  11. REMOVE NO. 1 AIR CLEANER HOSE

    Click here

  12. REMOVE INTAKE AIR CONNECTOR

    Click here

  13. REMOVE HEATER WATER PIPE SUB-ASSEMBLY (w/ Viscous Heater)

    Click here

  14. REMOVE NO. 1 AIR CLEANER PIPE SUB-ASSEMBLY

    Click here

  15. REMOVE FUEL TEMPERATURE SENSOR

    Note


    • Before replacing the fuel temperature sensor, be sure to clean the surrounding area.

    • When replacing the fuel temperature sensor, make sure that your hands are clean and do not use gloves, etc.

    • If the fuel temperature sensor is dropped, replace it with a new one.


    1. B001A9Z

      Disconnect the fuel temperature sensor connector.

    2. Using SST, remove the fuel temperature sensor.

      SST
      09817-33191

    3. Remove the O-ring from the fuel temperature sensor.