FUEL SYSTEM(w/o DPF) PRECAUTION


  1. FUEL SYSTEM


    1. Observe these precautions when disconnecting the fuel tube connector (for quick type A).


      1. A01WW1S

        Detach the lock claw by lifting up the cover as shown in the illustration.

        Text in Illustration
        B0018FC Pull

      2. Check for dirt or mud on the pipe and around the connector before disconnection. Clean if necessary.

      3. B001B4RE67
        Text in Illustration
        *1 Retainer
        B0018FC Pinch
        B00199O Pull

        Pinch the connector and disconnect the connector and pipe.

        If the connector and pipe are stuck together, pinch the connector, then push and pull the pipe to disconnect the pipe and pull it out.

        Note

        Do not use any tools in this procedure.

      4. Check for dirt or mud on the seal surface of the disconnected pipe. Clean if necessary.

      5. A01WPC9E32
        Text in Illustration
        *1 Plastic Bag

        To protect the disconnected pipe and connector from damage and contamination, cover it with a plastic bag.

    2. Observe these precautions when disconnecting the fuel tube connector (for quick type B).


      1. A01WW2VE10
        Text in Illustration
        *1 Retainer
        B0018FC Push
        B00199O Push Out
        B001A0Q Pull

        Check that there is no damage or foreign matter on the part of the pipe that contacts the connector.

      2. B001A71

        Detach the 2 claws of the connector retainer. Push down on the connector and disconnect it from the pipe.

        Note

        Do not use any tools in this procedure.

        Tech Tips

        If the connector and pipe are stuck, pinch the fuel pipe by hand, and push and pull the connector to disconnect it.

      3. Check for foreign matter on the seal surface of the disconnected pipe. Clean it if necessary.

      4. A01WU9DE06
        Text in Illustration
        *1 Plastic Bag

        To protect the disconnected pipe and connector from damage and foreign matter, cover it with a plastic bag.

    3. Observe these precautions when connecting the fuel tube connector (for quick type B).


      1. A01WWUUE12
        Text in Illustration
        *1 Retainer
        B0018FC Push Up
        B00199O Push

        Check for foreign matter on the pipe and around the connector before connecting it. Clean it if necessary.

      2. Align the axis of the connector with the axis of the pipe. Push the pipe into the connector, and push up on the retainer.

      3. A01WSV5

        After connecting the pipe and connector, try to pull them apart to confirm that they are securely connected.

        Text in Illustration
        B00199O Pull
    4. A01WV07

      Observe these precautions when connecting the fuel tube connector (for quick type A).

      Text in Illustration
      B0018FC Push

      1. Check that there is no damage or contamination in the connected part of the pipe.

      2. Align the axis of the connector with the axis of the pipe. Push the pipe into the connector until the connector makes a "click" sound. If the connection is tight, apply a small amount of fresh spindle oil or gasoline on the tip of the pipe.

      3. A01WQDN

        After having finished the connection, try to pull apart the pipe and the connector to confirm that they are securely connected.

        Text in Illustration
        B0018FC Pull
      4. A01WTSK

        Attach the lock claw to the connector by pushing down on the cover as shown in the illustration.

        Text in Illustration
        B0018FC Push

      5. Check that there is no fuel leakage.

  2. CHECK FOR FUEL LEAK


    1. Check that there are no fuel leaks after performing maintenance anywhere on the fuel system Click here.