FUEL PUMP REMOVAL

PROCEDURE


  1. REMOVE FUEL TANK SUB-ASSEMBLY


    1. Remove the fuel tank sub-assembly Click here.

  2. REMOVE FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY


    1. A01WRNPE01

      Set SST on the fuel pump gauge retainer.

      SST
      09808-14030

      Tech Tips


      • Engage the claws of SST securely with the fuel pump gauge retainer holes to secure SST.

      • Install SST while pressing the claws of SST against the fuel pump gauge retainer (towards the center of SST).

    2. A01WQNG

      Using SST, loosen the retainer.

      SST
      09808-14030
      Text in Illustration
      B0018FC Turn

      Tech Tips

      Fit the tips of SST onto the ribs of the retainer.

      Note


      • When the retainer is loosened, be careful as the pump and gauge tube will spring upward from the force of the spring.

      • Remove foreign matter around the fuel suction with pump and gauge before this operation.

    3. Remove the retainer.

    4. Remove the fuel suction with pump and gauge tube assembly from the fuel tank.

      Note

      Be careful not to bend the arm of the fuel sender gauge.

    5. Remove the gasket from the fuel tank.