FUEL FILTER REPLACEMENT

PROCEDURE


  1. DISCHARGE FUEL SYSTEM PRESSURE

    Click here

  2. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. REMOVE NO. 1 FUEL TUBE PROTECTOR


    1. B001A3M

      Remove the 4 bolts and No. 1 fuel tube protector.

  5. DISCONNECT NO. 2 FUEL MAIN TUBE SUB-ASSEMBLY


    1. B0019QVE06
      Text in Illustration
      *1 Retainer
      *2 Nylon Tube
      *3 Pipe
      *4 O-Ring
      *5 Connector

      Pull up the retainer and disconnect the No. 2 fuel main tube.

      Note


      • Check for foreign matter in the pipe and around the connector. Clean if necessary. Foreign matter may damage the O-ring or cause leaks in the seal between the pipe and connector.

      • Do not use any tools to separate the pipe and connector.

      • Do not forcefully bend or twist the nylon tube.

      • Check for foreign matter on the pipe seal surface. Clean if necessary.

      • Put the pipe and connector ends in plastic bags to prevent damage and foreign matter contamination.

      • If the pipe and connector are stuck together, pinch the connector between your fingers and turn it carefully to disconnect it.

  6. DISCONNECT FUEL MAIN TUBE


    1. B0019K0E05
      Text in Illustration
      *1 Retainer
      *2 Nylon Tube
      *3 Pipe
      *4 O-Ring
      *5 Connector

      Pull up the retainer and disconnect the fuel main tube.

      Note


      • Check for foreign matter in the pipe and around the connector. Clean if necessary. Foreign matter may damage the O-ring or cause leaks in the seal between the pipe and connector.

      • Do not use any tools to separate the pipe and connector.

      • Do not forcefully bend or twist the nylon tube.

      • Check for foreign matter on the pipe seal surface. Clean if necessary.

      • Put the pipe and connector ends in plastic bags to prevent damage and foreign matter contamination.

      • If the pipe and connector are stuck together, pinch the connector between your fingers and turn it carefully to disconnect it.

  7. REMOVE FUEL FILTER ASSEMBLY


    1. B001A3N

      Remove the 2 bolts and fuel filter.

  8. INSTALL FUEL FILTER ASSEMBLY


    1. Install the fuel filter with the 2 bolts.

      Torque:
      20 N*m  { 199 kgf*cm, 14 ft.*lbf }

  9. CONNECT FUEL MAIN TUBE


    1. B001AOVE05
      Text in Illustration
      *1 Retainer
      *2 Nylon Tube
      *3 Pipe
      *4 O-Ring
      *5 Connector

      Connect the fuel main tube and push the retainer.

      Tech Tips

      Push the parts together firmly until a "click" sound is heard.

      Note


      • Before installing the tube connectors to the pipes, check if there is any damage or foreign matter in the connectors.

      • After the connection, check if the connectors and pipes are securely connected by trying to pull them apart.

  10. CONNECT NO. 2 FUEL MAIN TUBE SUB-ASSEMBLY


    1. B0019G7E05
      Text in Illustration
      *1 Retainer
      *2 Nylon Tube
      *3 Pipe
      *4 O-Ring
      *5 Connector

      Connect the No. 2 fuel main tube and push the retainer.

      Tech Tips

      Push the parts together firmly until a "click" sound is heard.

      Note


      • Before installing the tube connectors to the pipes, check if there is any damage or foreign matter in the connectors.

      • After the connection, check if the connectors and pipes are securely connected by trying to pull them apart.

  11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  12. INSPECT FOR FUEL LEAK

    Click here

  13. INSTALL NO. 1 FUEL TUBE PROTECTOR


    1. B001A3M

      Install the No. 1 fuel tube protector with the 4 bolts.

      Torque:
      29 N*m  { 296 kgf*cm, 21 ft.*lbf }