FUEL PRESSURE REGULATOR REMOVAL

PROCEDURE


  1. REMOVE UPPER RADIATOR SUPPORT SEAL

    Click here

  2. REMOVE V-BANK COVER SUB-ASSEMBLY

    Click here

  3. DISCHARGE FUEL SYSTEM PRESSURE

    Click here

  4. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  5. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  6. REMOVE AIR CLEANER HOSE ASSEMBLY

    Click here

  7. REMOVE FUEL PRESSURE REGULATOR ASSEMBLY


    1. B0019W2

      Disconnect the No. 2 fuel tube from the pressure regulator Click here.

      CAUTION:

      Put a cloth or equivalent under the pressure regulator.

    2. B001ABI

      Disconnect the vacuum sensing hose from the pressure regulator.

    3. B001AH1

      Remove the 2 bolts, and pull out the pressure regulator.

    4. Remove the O-ring from the pressure regulator.