FUEL PRESSURE REGULATOR INSTALLATION

PROCEDURE

1. INSTALL FUEL PRESSURE REGULATOR ASSEMBLY

   
   

   1. 

      Apply a light coat of gasoline or spindle oil to a new O-ring, and install it to the pressure regulator.

      Note

      
      

      • Make sure that there are no scratches or foreign matter in or around the insertion hole of the delivery pipe.

      • When inserting the injector, be careful not to damage the O-ring.

   2. While turning the pressure regulator left and right, install it to the delivery pipe.

   3. 

      Install the 2 bolts.

      Torque:

      10 N*m  { 107 kgf*cm, 7 ft.*lbf }

   4. 

      Connect the vacuum sensing hose to the pressure regulator.

   5. 

      Connect the No. 2 fuel tube to the pressure regulator Click here.

2. INSTALL AIR CLEANER HOSE ASSEMBLY

   Click here

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

4. INSPECT FOR FUEL LEAK

   Click here

5. INSTALL V-BANK COVER SUB-ASSEMBLY

   Click here

6. INSTALL UPPER RADIATOR SUPPORT SEAL

   Click here