FUEL INJECTOR REMOVAL

PROCEDURE


  1. REMOVE UPPER RADIATOR SUPPORT SEAL

    Click here

  2. REMOVE V-BANK COVER SUB-ASSEMBLY

    Click here

  3. DISCHARGE FUEL SYSTEM PRESSURE


    1. Discharge the fuel system pressure Click here.

  4. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  5. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  6. REMOVE AIR CLEANER HOSE ASSEMBLY

    Click here

  7. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY


    1. B0019LH

      Remove the No. 1 engine cover sub-assembly.

  8. REMOVE NO. 3 ENGINE COVER


    1. B0018K6

      Remove the No. 3 engine cover.

  9. DISCONNECT NO. 2 FUEL TUBE


    1. B0018EB

      Disconnect the No. 2 fuel tube from the fuel pressure regulator Click here.

  10. DISCONNECT NO. 1 FUEL TUBE


    1. B001B0U

      RH Side:

      Disconnect the No. 1 fuel tube from the fuel delivery pipe RH (for metallic type) Click here.

      SST
      09268-21011
    2. B00197L

      LH Side:

      Disconnect the No. 1 fuel tube from the fuel delivery pipe LH Click here.

  11. DISCONNECT NO. 1 FUEL HOSE


    1. B0019LC

      Disconnect the fuel hose from the fuel delivery pipe LH Click here.

  12. REMOVE FUEL DELIVERY PIPE SUB-ASSEMBLY RH


    1. B0018O5

      Disconnect the ventilation hose and No. 6 wire harness connector.

    2. B001AYZ

      Remove the 2 bolts and fuel delivery pipe RH.

      Note

      When removing the delivery pipe, hold the pipe by both ends and pull it straight upward.

    3. Remove the 2 delivery pipe spacers and 4 insulators from the cylinder head RH.

  13. REMOVE FUEL DELIVERY PIPE SUB-ASSEMBLY LH


    1. Disconnect the No. 7 wire harness connector.

    2. B0019UL

      Remove the 2 bolts and fuel delivery pipe LH.

      Note

      When removing the delivery pipe, hold the pipe by both ends and pull it straight upward.

    3. Remove the 2 delivery pipe spacers and 4 insulators from the cylinder head LH.

  14. REMOVE FUEL INJECTOR ASSEMBLY


    1. B0019AB
      Text in Illustration
      *a No. 1

      Remove the fuel injector from the fuel delivery pipe, and then disconnect the injector connector.

      Note

      B001AFCE01

      For reinstallation, attach a tag or label to the injector shaft.

    2. B001AMUE05
      Text in Illustration
      *1 O-ring

      Remove the O-ring from the fuel injector.

    3. B001AA6

      Detach the 3 clamps and then remove the No. 6 wire harness from the delivery pipe RH.

    4. B00188G

      Detach the 3 clamps and then remove the No. 7 wire harness from the delivery pipe LH.