DRIVE BELT REMOVAL

PROCEDURE


  1. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

    Click here

  2. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

    Click here

  3. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

    Click here

  4. REMOVE UPPER RADIATOR SUPPORT SEAL

    Click here

  5. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

    Click here

  6. REMOVE AIR CLEANER CAP SUB-ASSEMBLY

    Click here

  7. REMOVE NO. 1 AIR CLEANER HOSE

    Click here

  8. REMOVE INTAKE AIR CONNECTOR

    Click here

  9. REMOVE V-RIBBED BELT (w/ Viscous Heater)


    1. B001AT3

      Loosen the lock nut and turn the bolt counterclockwise.

    2. Remove the V-ribbed belt.

  10. REMOVE NO. 1 IDLER PULLEY (w/ Viscous Heater)


    1. B00191Y

      Remove the bolt, cover, No. 1 idler pulley and collar.

  11. REMOVE NO. 3 IDLER PULLEY (w/ Viscous Heater)


    1. B0019R0

      Remove the nut and No. 3 idler pulley.

  12. REMOVE V-RIBBED BELT


    1. B001ATT

      Using a wrench to the V-ribbed belt tensioner bracket, turn the wrench clockwise and remove the V-ribbed belt.