FRONT CRANKSHAFT OIL SEAL REMOVAL

PROCEDURE

1. REMOVE UPPER RADIATOR SUPPORT SEAL

   Click here

2. REMOVE V-BANK COVER SUB-ASSEMBLY

   Click here

3. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

   Click here

4. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

   Click here

5. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

   Click here

6. DRAIN ENGINE COOLANT

   Click here

7. REMOVE NO. 1 RADIATOR HOSE

8. REMOVE FAN SHROUD

   Click here

9. REMOVE OIL PRESSURE SENDER GAUGE ASSEMBLY

   Click here

10. REMOVE OIL FILTER BRACKET (w/o Oil Cooler)

    Click here

11. DISCONNECT COOLER COMPRESSOR ASSEMBLY (w/ Oil Cooler)

    Click here

12. DISCONNECT NO. 2 WATER BY-PASS PIPE SUB-ASSEMBLY (w/ Oil Cooler)

    
    

    1. 

       Remove the 3 bolts and disconnect the 2 water by-pass hoses from the oil cooler.

13. REMOVE NO. 1 OIL COOLER BRACKET (w/ Oil Cooler)

    Click here

14. REMOVE OIL FILTER BRACKET (w/ Oil Cooler)

    Click here

15. REMOVE CRANKSHAFT PULLEY

    Click here

16. REMOVE CRANKSHAFT TIMING GEAR KEY

    
    

    1. 

       Remove the crankshaft timing gear key from the crankshaft.

17. REMOVE FRONT CRANKSHAFT OIL SEAL

    
    

    1. 

       Using a screwdriver, pry out the oil seal.

       Tech Tips

       Tape the screwdriver tip before use.

       Note

       Do not damage the surface of the oil seal press fit hole and crankshaft.