DRIVE BELT REMOVAL

PROCEDURE

1. REMOVE UPPER RADIATOR SUPPORT SEAL

   Click here

2. REMOVE V-BANK COVER SUB-ASSEMBLY

   Click here

3. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

   Click here

4. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

   Click here

5. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

   Click here

6. REMOVE FAN AND GENERATOR V BELT

   
   
   1. 

      *1

      Bar

      While turning the belt tensioner counterclockwise, align the service hole for the belt tensioner and the belt tensioner fixing position, and then insert a bar of φ5 mm (0.197 in.) into the service hole to fix the belt tensioner in place.

      Tech Tips

      The pulley bolt for the belt tensioner has a left-hand thread.

   2. Remove the V belt.