PROCEDURE
INSTALL POWER STEERING OIL PRESSURE SWITCH
Apply a light coat of engine oil to the O-ring of the power steering oil pressure switch.
Using a 19 mm deep socket wrench, install the power steering oil pressure switch.
Note
Do not allow foreign matter to contact the oil seal face of the power steering oil pressure switch (connecting surface with pressure feed tube).
Be careful not to damage the O-ring when installing the power steering oil pressure switch.
Connect the connector to the power steering oil pressure switch.
INSTALL RADIATOR RESERVOIR ASSEMBLY
INSTALL NO. 1 OIL RESERVOIR BRACKET
INSTALL VANE PUMP OIL RESERVOIR ASSEMBLY
INSTALL NO. 1 AIR CLEANER PIPE SUB-ASSEMBLY
INSTALL HEATER WATER PIPE SUB-ASSEMBLY (w/ Viscous Heater)
INSTALL NO. 3 AIR TUBE
INSTALL NO. 1 AIR HOSE
INSTALL INTAKE AIR CONNECTOR
TEMPORARILY INSTALL NO. 1 AIR CLEANER HOSE
INSTALL AIR CLEANER CAP SUB-ASSEMBLY
CONNECT WATER HOSE SUB-ASSEMBLY (w/ Viscous Heater)
Connect the 2 water hoses to the heater water pipe sub-assembly, and slide the clamp to secure the 2 hoses.
INSTALL INTERCOOLER ASSEMBLY
INSTALL V-RIBBED BELT
INSTALL NO. 3 IDLER PULLEY (w/ Viscous Heater)
INSTALL NO. 1 IDLER PULLEY (w/ Viscous Heater)
INSTALL V-RIBBED BELT (w/ Viscous Heater)
ADD ENGINE COOLANT
INSPECT FOR COOLANT LEAK
INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY
INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH
INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH