POWER STEERING OIL PRESSURE SWITCH REMOVAL

PROCEDURE

1. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

   Click here

2. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

   Click here

3. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

   Click here

4. DRAIN ENGINE COOLANT

   Click here

5. REMOVE V-RIBBED BELT (w/ Viscous Heater)

   Click here

6. REMOVE NO. 1 IDLER PULLEY (w/ Viscous Heater)

   Click here

7. REMOVE NO. 3 IDLER PULLEY (w/ Viscous Heater)

   Click here

8. REMOVE V-RIBBED BELT

   Click here

9. REMOVE INTERCOOLER ASSEMBLY

   Click here

10. DISCONNECT WATER HOSE SUB-ASSEMBLY (w/ Viscous Heater)

    
    

    1. 

       Slide the 2 clamps and disconnect the 2 water hoses from the heater water pipe sub-assembly.

11. REMOVE AIR CLEANER CAP SUB-ASSEMBLY

    Click here

12. REMOVE NO. 1 AIR CLEANER HOSE

    Click here

13. REMOVE INTAKE AIR CONNECTOR

    Click here

14. REMOVE NO. 1 AIR HOSE

    Click here

15. REMOVE NO. 3 AIR TUBE

    Click here

16. REMOVE HEATER WATER PIPE SUB-ASSEMBLY (w/ Viscous Heater)

    Click here

17. REMOVE NO. 1 AIR CLEANER PIPE SUB-ASSEMBLY

    Click here

18. DISCONNECT VANE PUMP OIL RESERVOIR ASSEMBLY

    Click here

19. REMOVE NO. 1 OIL RESERVOIR BRACKET

    Click here

20. REMOVE RADIATOR RESERVOIR ASSEMBLY

    Click here

21. REMOVE POWER STEERING OIL PRESSURE SWITCH

    
    
    1. 

       Text in Illustration

       *A	w/ DPF
       *B	w/o DPF

       Disconnect the connector from the power steering oil pressure switch.

    2. Using a 19 mm deep socket wrench, remove the power steering oil pressure switch.