INTAKE AIR TEMPERATURE SENSOR INSTALLATION

PROCEDURE


  1. INSTALL INTAKE AIR TEMPERATURE SENSOR


    1. A01WWCYE01
      Text in Illustration
      *a Torque Wrench Fulcrum Length

      Using a ball joint lock nut wrench, install a new gasket and the intake air temperature sensor.

      Specified tightening torque
      29 N*m (296 kgf*cm, 21 ft.*lbf)

      Note

      Do not use a tool such as an impact wrench or equivalent.

      Tech Tips


      • Calculate the torque wrench reading when changing the fulcrum length of the torque wrench Click here.

      • When using a ball joint lock nut wrench (fulcrum length of 149.75 mm (5.90 in.)) + torque wrench (fulcrum length of 180 mm (7.09 in.)): 16 N*m (161 kgf*cm, 12 ft.*lbf)

  2. INSTALL INTERCOOLER ASSEMBLY

    Click here